Home | » Products | » Laboratory Equipment | » Fume Chamber |
Construction
Double skin sandwich constructionUpper unit
These are fabricated with prime CRCA sheet dully epoxypowder coated electro statically and inner chamber lined acid resistance other lining viz: PPGL or FRP; S. Steel/ Bisphenol are as optional at extra.Sash
The sash used are made of polycarbonate clear sheet of 4 or 4.5 mm thick or laminated safety/toughened glass (optional at extra). These are framed for easy vertical movement by concealed counter weights that are operated by steel wire rope or cable. Also, the baffle at inside rear has been designed suitably as per application.Services
No. of LPG or air/gas or vacuum provided( remote control operated)-Additional lines and service at extraIllumination
A chamber is provided with vapor proof fitting of fluorescent tube light.Electric Points
Industrial socket of 15 Amp provided in side chamber with switch provided on front faciaDesign
Model with underbench storing provision for chemical storage/LPG cylinderExhaust System
Consists of centrifugal blower and ducting. The centrifugal blower are fabricated with PP or PPGL with FRP lining with a dynamically balanced impeller of polypropylene directly driven by 1 or 3 phase, CROMPTION or any standard make electrical motor. Exhaust blower of suitable CFM capacity is recommended to suit to the size of fume hood. A 15 ft long ducting included as Std. Supplies.